|
Name of Student |
Dissertation |
In Association with |
Year |
|
Abhishek Meena |
Source localisation and quantitative structure health monitoring using Acoustic emission
|
|
2024 |
|
Dinesh Shelke |
Experimental and numerical investigations of an RCC beams subjected to four-point bending tests with parametric analysis of acoustic emission (AE)
|
< |
2022 |
|
Priyanshi Singh |
Condition Monitoring of Corroded Reinforced Concrete Beams Using Active and Passive Techniques
|
|
2019 |
|
Rifan C |
Condition Assessment of Concrete Structures Using Stress Wave Propagation with Distributed Sensor Array
|
|
2018 |
|
Yash Dhabalia |
Assessment of Joints in Frame Structure using Guided Waves and Embedded Sensors
|
|
2018 |
|
Arun Roy |
Numerical Modelling of Acoustic Emission for Damage Localisation in Concrete Beams
|
|
2017 |
|
Umesh Prajapat |
Dispersion curve verification and damage monitoring of steel rebar utilizing ultrasonic
guided wave
|
|
2016 |
|
Junghare Vipula Baban |
Transient dynamic analysis of sandwich structures using acoustic emission sources
|
|
2015 |
|
Pinjarla Uday Prasanth |
Structural Health Monitoring of a Splice Joint in a Steel Beam
|
|
2016 |
|
Suryakant Agrawal |
Performance Degradation of RC Beams due to Corrosion
|
|
2015 |
|
Swarup Ranjan Sahoo |
Damage Assessment of Truss Bridges using Vibration Characteristics
|
|
2015 |
|
Kathe Sai Charan |
Structural Health Monitoring of Splice Joint in Steel Beam |
|
2015 |
|
Soumil Agrawal |
Vibration based Health Monitoring of Metallic Stiffened Plate Structures
|
|
2014 |
|
Vora Niket Harish |
Modeling & Detection of Debonding at Steel-Concrete Interface in RC Structures using Impact Echo Method |
|
2014 |
|
G Ashish |
Damage Detection Algorithms for Structural Health
Monitoring of Metallic and Honeycomb Composite Sandwich Plate Structures using Ultrasonic Guided Wave
|
|
2014 |
|
Ajinkya Milind Rajadhyaksha |
Detection of disbonds in
sandwich structure using experimental guided wave technique |
|
2013 |
|
Vishesh Parnerkar |
Displacement based health monitoring of bolted joints |
|
2013 |
|
Debashis Wadadar |
Performance of vibration based damage detection algorithms for health monitoring of metallic plate structure
|
|
2013 |
|
Yashdeep Jadon |
Buckling of Uniform Columns |
|
2013 |
|
Shaik Mahabu Subhani |
Detection of disbonds in
sandwich structure using experimental guided wave technique |
|
2013 |
|
Debadatta Mandal |
Health Monitoring of
Metallic Structures Using Guided Waves |
|
2012 |
|
Vishal Shah |
Damage Detection in
Metallic Frames Using Frequency Response Function Method |
|
2012 |
|
Rishi Ashok Sharma |
Detection of Voids in
Concrete Structures Using Impact Echo, Experiments |
|
2012 |
|
Pankaj Jitendra Jain |
Damage Detection in Stiffened Metallic Structures Using
Vibration Approach |
|
2012 |
|
Parija Bilaye |
Damage Localization in
Thin Metallic Plates using Guided Wave Propagation |
|
2011 |
|
Harisha G M |
Modeling and Characterization of Reflectors in Concrete
Structures using Impact Echo Method |
|
2011 |
|
Usharani Morabada
|
Influence of Damage on
Mode Shape Curvature and Frequency Response Function
Curvature |
|
2011 |
|
Shobhit Vashistha
|
Finite Element Modeling of Wave Propagation in
Honeycomb-Composite Sandwich Structures |
|
2010 |
|
Sumeet Garg |
Theoretical Modeling of
Wave Propagation in Honeycomb-Composite Sandwich Structures
|
|
2010 |
