Header

IITB Logo Indian Institute of Technology Bombay
Department of Civil Engineering

Invited Talk

Invited Talks

  1. Maji, A. (2024). Safety in Design of Intersections and Interchanges. 17th to 31st January 2024, Road Safety Auditors Certification Course, Organized by Indian Institute of Technology Guwahati, India.

  2. Maji, A. (2023). Perception of Comfort and Security of Peri-Urban Public Transport. 30th September 2023, 8th Seminar on Travel in Cities: Towards Sustainability, Organized by Institute of Urban Transport (India) SVNIT Regional Chapter, Surat, India.

  3. Maji, A. (2023). Automation in Highway and Railway Infrastructure Planning and Design. 2nd September 2023, Department of Civil and Environmental Engineering at the National University of Singapore (NUS), Singapore.

  4. Maji, A. (2023). Automation in Highway and Railway Infrastructure Planning and Design. 13th to 18th July 2023, Workshop on Highway Geometric Design, Organized by Birla Institute of Technology and Science Pilani, Hyderabad, India.

  5. Maji, A. (2023). Keynote lecture on Automation in Highway and Railway Infrastructure Planning and Design. 18th to 19th May 2023, A Two-day National Meet cum Workshop on Building Human Capital Through Technical Education for PM Gati Shakti, Organized by National Institute of Technical Teachers' Training and Research (NITTTR), Bhopal, India.

  6. Maji, A. (2022). Road Safety Considerations in Planning and Designing of Highways. 28th November to 9th December 2022, Online Training Programme on Road Safety Engineering and Auditing, Organized by Indian Academy of Highway Engineers (IAHE), Noida, India.

  7. Maji, A. (2022). Application of ITS Data – Use of Image Processing Techniques for Traffic Data Collection. 4th to 8th July 2022, High-End Workshop on Applications of Intelligent Transportation Systems and Drone Technology for Traffic Engineering Studies, Organized by Visvesvaraya National Institute of Technology (VNIT) Nagpur, India.

  8. Maji, A. (2022). Road Safety Considerations in Planning and Designing of Highways. 25th July to 5th August 2022, Online Training Programme on Road Safety Engineering and Auditing, Organized by Indian Academy of Highway Engineers (IAHE), Noida, India.

  9. Maji, A. (2022). Performance Based Design and Evaluation of Rural Highways. 2nd to 7th May 2022, QIP Sponsored Short Term Course on Advances in Transportation Infrastructure Engineering, Organized by Indian Institute of Technology Indore, India.

  10. Maji, A. (2022). Road Safety Considerations in Planning and Designing of Highways. 18th to 29th April 2022, Online Training Programme on Road Safety Engineering and Auditing, Organized by Indian Academy of Highway Engineers (IAHE), Noida, India.

  11. Maji, A. (2021). Perception of peri-urban public transportation system in Post COVID 19 lockdown era: A case study of Kalyan-Dombivli region. 20th to 22nd December 2021, Webinar on Sustainable Urban Living and Mobility in Developing Nations: Integrating Inherent Strengths with Learnings from Developed Economies, Jointly organized by Indian Institute of Technology Kharagpur, University of Leeds, and Queens University Belfast.

  12. Maji, A. (2021). Road Safety Considerations in Planning and Designing of Highways. 22nd November to 3rd December 2021, Online Training Programme on Road Safety Engineering and Auditing, Organized by Indian Academy of Highway Engineers (IAHE), Noida, India.

  13. Maji, A. (2021). Road Safety Considerations in Planning and Designing of Highways. 26th July to 5th August 2021, Online Training Programme on Road Safety Engineering and Auditing, Organized by Indian Academy of Highway Engineers (IAHE), Noida, India.

  14. Maji, A. (2021). Road Geometric Characteristics and Design. 24th April to 8th May 2021, 15-Days Road Safety Auditors Training, Organized by Malaviya National Institute of Technology Jaipur, India.

  15. Maji, A. (2021). Road Safety Considerations in Planning and Designing of Highways. 12th to 24th April 2021, Online Training Programme on Road Safety Engineering and Auditing, Organized by Indian Academy of Highway Engineers (IAHE), Noida, India.

  16. Maji, A. (2021). Keynote lecture on Safety based evaluation and design of two-lane undivided highways in India. 6th February 2021, DST-SERB sponsored online Training and Workshop on Road Safety Management Practices in India: Lessons Learned and Way Forward, Organized by Birla Institute of Technology and Science Pilani, Hyderabad, India.

  17. Maji, A. (2021). Road Geometric Characteristics and Roadway Design. 23rd January to 7th February 2021, 15-Days Road Safety Auditors Training, Organized by Malaviya National Institute of Technology Jaipur, India.

  18. Maji, A. (2020). Road Geometric Characteristics and Roadway Design. 5th to 19th December 2020, 15-Days Road Safety Auditors Certification Course, Organized by Malaviya National Institute of Technology Jaipur, India.

  19. Maji, A. (2020). Performance based Geometric Design for Two-lane Rural Highways. 16th December 2020, International Linkage Degree Program (ILDP), Organized by ILDP Office, Hiroshima University, Japan.

  20. Maji, A. (2020). Performance based evaluation and design of two-lane undivided highways in India. 2nd to 7th November 2020, Emerging Technologies in Transportation Engineering for Sustainable Development (Series III-Bridges and Transportation Planning), Organized by Vignana Bharathi Institute of Technology, Hyderabad, India.

  21. Maji, A. (2020). Roadway design. 10th to 24th October 2020, 15-Days Road Safety Auditors Certification Course, Organized by Malaviya National Institute of Technology Jaipur, India.

  22. Maji, A. (2020). Road Geometric Characteristics. 10th to 24th October 2020, 15-Days Road Safety Auditors Certification Course, Organized by Malaviya National Institute of Technology Jaipur, India.

  23. Maji, A. (2020). Performance based evaluation of two- lane undivided rural highways. 25th to 29th July 2020, Modern Trends in Transportation System (MTTS2020), Organized by National Institute of Technology Silchar, India.

  24. Maji, A. (2020). Selecting Transit Rail Station Location Considering Network Congestion. 6th and 7th March 2020, Concept, Theory and Practices of Road Pricing Schemes: Lessons Learned and Way Forward, Organized by BITS Pilani, Hyderabad, India.

  25. Maji, A. (2020). Roadway design. 20th January to 5th February 2020, Road Safety Audit and Related Aspects, Organized by Sardar Vallabhbhai National Institute of Technology (SVNIT), Surat, India.

  26. Maji, A. (2020). Road Geometric Characteristics. 20th January to 5th February 2020, Road Safety Audit and Related Aspects, Organized by Sardar Vallabhbhai National Institute of Technology (SVNIT), Surat, India.

  27. Maji, A. (2020). Road Safety: Facts and Findings. 11th to 17th January 2020, 31st National Road Safety Week, Organized by Kalyan-Dombivli Municipal Corporation (KDMC), Dombivli, India.

  28. Maji, A. (2019). Horizontal Alignment. 9th to 20th December 2019, Certificate course on Road Safety Engineering and Audit, Organized by Indian Academy of Highway Engineers (IAHE), Noida, India.

  29. Maji, A. (2019). Road Geometric Characteristics. 9th to 20th December 2019, Certificate course on Road Safety Engineering and Audit, Organized by Indian Academy of Highway Engineers (IAHE), Noida, India.

  30. Maji, A. (2019). Vertical Profile. 17th July to 30th August 2019, Certificate course on Road Safety Engineering and Audit, Organized by Indian Academy of Highway Engineers (IAHE), Noida, India.

  31. Maji, A. (2019). Horizontal Alignment. 17th July to 30th August 2019, Certificate course on Road Safety Engineering and Audit, Organized by Indian Academy of Highway Engineers (IAHE), Noida, India.

  32. Maji, A. (2019). Road Geometric Characteristics – Cross section, Surface Condition, Slope and Curves. 17th July to 30th August 2019, Certificate course on Road Safety Engineering and Audit, Organized by Indian Academy of Highway Engineers (IAHE), Noida, India.

  33. Maji, A. (2019). Performance Evaluation of Horizontal Curves for Safety and Design. 17th June 2019, TEQIP III Sponsored Workshop on Research and Innovations in Traffic Safety Engineering , Organized by Indian Institute of Engineering Science and Technology (IIEST), Shibpur, Howrah, India.

  34. Maji, A. (2018). Roadside Design and Appurtenances. 3rd to 7th December 2018, Road Safety Training Programme for Field Engineers, Organized by Ministry of Road Transport & Highways (MoRTH) in association with Asian Institute of Transport Development (AITD) and Indian Institute of Science (IISc), Bengaluru, India.

  35. Maji, A. (2018). Safety in Road Design - Junction. 3rd to 7th December 2018, Road Safety Training Programme for Field Engineers, Organized by Ministry of Road Transport & Highways (MoRTH) in association with Asian Institute of Transport Development (AITD) and Indian Institute of Science (IISc), Bengaluru, India.

  36. Maji, A. (2018). Safety in Road design - Road links. 3rd to 7th December 2018, Road Safety Training Programme for Field Engineers, Organized by Ministry of Road Transport & Highways (MoRTH) in association with Asian Institute of Transport Development (AITD) and Indian Institute of Science (IISc), Bengaluru, India.

  37. Maji, A. (2018). What Affects the Safe Vehicle Speed in Horizontal Curve? 11th to 12th August 2018, Recent Advances in Traffic Engineering (RATE) 2018, Sardar Vallabhbhai National Institute of Technology (SVNIT), Surat, India.

  38. Maji, A. (2018). Highway Geometric Design and Safety. 2nd to 6th July 2018, Training Programme on Road Safety Engineering Measures, Jointly Organized by TSE Group, Indian Institute of Technology Bombay and Asian Institute of Transport Development, Mumbai, India.

  39. Maji, A. (2018). Work Zone and Some Case Studies. 6th to 10th February 2018, Training Programme on Road Safety, Jointly Organized by Indian Institute of Technology Guwahati and Asian Institute of Transport Development, Guwahati, India.

  40. Maji, A. (2018). Safety in Road Design: Junctions. 6th to 10th February 2018, Training Programme on Road Safety, Jointly Organized by Indian Institute of Technology Guwahati and Asian Institute of Transport Development, Guwahati, India.

  41. Maji, A. (2018). Safety in Road Design: Road Links. 6th to 10th February 2018, Training Programme on Road Safety, Jointly Organized by Indian Institute of Technology Guwahati and Asian Institute of Transport Development, Guwahati, India.

  42. Maji, A. (2017). Performance Based geometric Design. 21st December 2017, Recent Innovations in Civil Engineering (RICE-2017), Organized by Datta Meghe College of Engineering, Mumbai, India.

  43. Maji, A. (2017). Design of Horizontal and Vertical Alignment. 30th January 2017, Workshop on Road Safety Audit, Organized by CEP Indian Institute of Technology Bombay, Mumbai, India.

  44. Maji, A. (2016). Good Practices in Highway Geometric Design. 12th August 2016, Workshop on Road Safety, Organized by Indian Institute of Technology Bombay in Association with NHAI, PIU, Nashik, India.

  45. Maji, A. and Velaga, N.R. (2016). Infrastructure, Driver Skills and Safety Evaluation through a Driving Simulator. 6th August 2016, Indian Institute of Technology Bombay Chapter General Body Meeting, Institute of Urban Transport (India), Mumbai, India.

  46. Maji A. (2016). Highway Geometry Evaluation using Driving Simulator for Indian Driving Conditions. 28th July 2016, Tongji University, Shanghai, China.

  47. Maji A. (2016). Assessment of Geometric Design for Safety. Emerging Trends in Road Safety Research & Management, 19th and 20th February 2016, National Institute of Technology (NIT) Patna, Patna, India.

  48. Maji, A. (2015). Sustainable Pavement Management System. 7th Annual India Roads Congress Conference 2015, 5th November 2015, Mumbai, India.

  49. Maji, A. (2015). Geometric Design and Safety. Construction and Road Safety Management, 26th to 30th October 2015, Sardar Vallabhbhai National Institute of Technology (SVNIT), Surat, India.

  50. Maji, A. (2015). Unconventional Intersection and Interchange Configurations. International Conference on Advances in Highway Engineering and Transportation Systems, 10th to 12th August 2015, Colombo, Sri Lanka.

  51. Maji, A. (2015). Unconventional Intersection and Interchange Configurations. National Conference on Emerging Trends on Sustainable Construction, 24th and 25th July 2015, Christ University, Bangalore, India.

  52. Maji, A. (2014). Geometric Design Consistency and Safety. TPMDC - 2014, 10th to 12th December 2014, IIT Bombay, Mumbai, India.

  53. Maji, A. (2014). Geometric Design Consistency and Road Safety. The 8th National Frontiers of Engineering (8NatFoE), 5th and 6th September 2014, Indian Institute of Technology Gandhinagar, Amhedabad, India.

  54. Maji, A. (2014). Fundamentals of Geometric Design of Different Roadway Elements. Recent Advances in Studies of Traffic Engineering, 30th June to 11th July 2014, Sardar Vallabhbhai National Institute of Technology (SVNIT), Surat, India.

  55. Maji, A. (2013). Highway Design - Best Practices and Safety. The 1st Build Jharkhand Summit at Ranchi, 30th and 31st October 2013, Ranchi, India.

  56. Maji, A. (2011). GA and GIS-based Highway Alignment Optimization Techniques and Present Trends. The 6th International Symposium on Visualization in Transportation, Chicago, USA.

  57. Maji, A. (2008). Multi-Objective Highway Alignment Optimization. Innovative Doctoral Transportation Research by Eisenhower Graduate Fellowship Recipients in the 87th Annual TRB Meeting, Washington, D.C., USA